This page:
Removing The Front ABS Sensor On A Fiat/Abarth 500
The ABS sensor is not handed so it will fit either side.
Sensor 52081842
 | Prise off the hub cover with a flat head screwdriver. |
|
 | Remove the wheel bolts and wheel. |
|
 | Spray a penetrating lubricant to the sensor and retaining bolt and let it sit for five minutes to soak in. Undo the 5mm allen bolt, and work the ABS sensor lose. |
|
 | Clean out the hole which the sensor sits in. |
|
 | Unclip the wire in the four places shown. |
|
 | Unscrew enough Phillips screws of the front arch liner... |
|
 | ....to enable you to lift the liner to access behind it. |
|
 | Unclip the sensor from it's bracket and unplug the connector. |
|
Related Links: Rear wheel bearing removal | 1.2 air filter & spark plug replacement | Front lower wishbone replacement